CNC lemezfék üzemeltetése és karbantartása

itthon / Blog / CNC lemezfék üzemeltetése és karbantartása

Operation guidance of CNC metal brake machine

1. Before the operation to check the leakage maintainer, the blade is not secure power wiring is not accurate. CNC metal brake function is large and adaptable which is our can use its premise. The electrical components insulation is not flawless. The transmission parts are not shielded. The body is not a reliable zero (grounding) maintenance. Acknowledge that there is no problem before use.

2. Before use, must be empty to try to work. To recognize no abnormalities before officially starting operations, the CNC sheet metal brake must go through reasonable debugging before you can use it.

3. In bending sheet metal, the metal plate must be placed smoothly. When the slider begins to move down, the upper die down, fix the metal plate for bending. Please do not process metal plates beyond the rated thickness or too hard.

4. When bending a short metal plate, pay attention to hold the plate material, to prevent the edge of the warp injury.

CNC lemezfék üzemeltetése és karbantartása

5. When bending a long metal plate, two people should operate, the latter listen to the former's command, cooperation, harmony, safety first.

6. During the work of the automated press brake, it is prohibited to adjust, repair, and clean up.

7. Replace the mold and repair, first power off after the replacement. CNC bending machine with good overall coordination can increase its overall function. The processed metal plate should be neatly placed, and the waste generated by the processing must be organized and clean. After the processing is completed pull the gate and power off, lock the gate box before disengaging.

CNC lemezfék üzemeltetése és karbantartása

Checking and maintenance of CNC metal brake

1. New machine should be changed within one month of work, and then once a year, each oil change should clean the oil tank.

2. Hydraulic oil used in the bending machine is 46 hydraulic oil or 32 hydraulic oil, according to the actual situation.

3. Monthly inspection of the oil tank oil level, such as hydraulic system maintenance should also be checked after the oil level below the oil window should be filled with hydraulic oil.

4. The system oil temperature should be between 35℃~60℃, not more than 70℃, such as too high will lead to deterioration of oil quality and accessories damage.

CNC lemezfék üzemeltetése és karbantartása

5. The filter should be replaced or thoroughly cleaned at each oil change.

6. Machine tools with related alarms or oil quality is not clean and other filter abnormalities should be replaced.

7. After one month of use of the new machine, check whether there is deformation at the bend of each oil pipe. If there is any abnormality, should be replaced. After two months of use, should tighten the connection of all accessories. Should be shut down when doing this work, no pressure in the system.

8. Monthly cleaning of hydraulic components (substrate, valve, motor, etc.), it is best to add a protective shield on the hydraulic system to prevent dirt from entering the system, cannot use cleaning agents.

RAUMAX is one of China top 10 press brake manufacturers, not only manufacture 100 ton press brake/200 ton press brake/CNC sheet metal brake and NC hydraulic press brake but also have guillotine shearing machine and small hydraulic ironworker, fiber laser cutting machine.